Consilex Muffa Cleaner
Ready-to-use, transparent cleaning agent for the safe removal of blackish deposits caused by mould and biodeterioration, as well as for the revitalising renewal of wooden surfaces. Consilex Muffa Cleaner is a biodegradable product, completely free from chlorine and caustic soda. Its strongly alkaline pH softens mould and surface dirt. The surfactants it contains assist the natural removal of dirt.
Consilex Muffa Cleaner
Ready-to-use, transparent cleaning agent for the safe removal of blackish deposits caused by mould and biodeterioration, as well as for the revitalising renewal of wooden surfaces. Consilex Muffa Cleaner is a biodegradable product, completely free from chlorine and caustic soda. Its strongly alkaline pH softens mould and surface dirt. The surfactants it contains assist the natural removal of dirt.
Consilex Muffa Remover
Eco-friendly solution containing specific active ingredients for the elimination of biodeteriogenic growths—mould, fungi, moss, algae, lichens, bacteria, etc.—from masonry, in full compliance with ecological protocols, with particular reference to bio-building applications and the restoration of historic and monumental buildings. More than 150,000,000 square metres treated and over 30 years of experience guarantee the product’s quality and effectiveness. Consilex Muffa Remover is based on quaternary ammonium salts and is completely free from chlorine and caustic soda. To promote suitable environmental conditions on the treated substrate and help prevent the formation of mould and biodeteriogenic organisms, the product has been formulated for slow biodegradability.
Consilex Muffa Remover
Eco-friendly solution containing specific active ingredients for the elimination of biodeteriogenic growths—mould, fungi, moss, algae, lichens, bacteria, etc.—from masonry, in full compliance with ecological protocols, with particular reference to bio-building applications and the restoration of historic and monumental buildings. More than 150,000,000 square metres treated and over 30 years of experience guarantee the product’s quality and effectiveness. Consilex Muffa Remover is based on quaternary ammonium salts and is completely free from chlorine and caustic soda. To promote suitable environmental conditions on the treated substrate and help prevent the formation of mould and biodeteriogenic organisms, the product has been formulated for slow biodegradability.
Sanareg
Non-film-forming reactive liquid based on an alkylsilane emulsion dissolved in water, to be used to inhibit salt efflorescence in dehumidifying masonry renovation works, by spraying or application with a stiff-bristle brush. Sanareg penetrates the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered along its path, forming an invisible water-repellent barrier that prevents water from reaching the surface, while leaving water-vapour permeability unchanged.
Sanareg
Non-film-forming reactive liquid based on an alkylsilane emulsion dissolved in water, to be used to inhibit salt efflorescence in dehumidifying masonry renovation works, by spraying or application with a stiff-bristle brush. Sanareg penetrates the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered along its path, forming an invisible water-repellent barrier that prevents water from reaching the surface, while leaving water-vapour permeability unchanged.
Sanakoll
One-component adhesive–skim coat based on hydraulic lime, special flexible polymers, rheological additives, water-retaining agents, microsilicates with pozzolanic activity and spherical low-specific-weight aggregates. For smoothing and levelling a wide range of substrates, lightweight bonding and as a skim coat/adhesive for our special SANATEX membrane (on thermal bridges, damp and/or cracked masonry).
Sanakoll
One-component adhesive–skim coat based on hydraulic lime, special flexible polymers, rheological additives, water-retaining agents, microsilicates with pozzolanic activity and spherical low-specific-weight aggregates. For smoothing and levelling a wide range of substrates, lightweight bonding and as a skim coat/adhesive for our special SANATEX membrane (on thermal bridges, damp and/or cracked masonry).
Sanawool
Thermal mat made entirely from recovered sheep wool, completely free from synthetic fibres, adhesives and polymers. Sanawool is supplied in rolls. Each roll is 10 metres long, 1 metre wide and 10 mm thick, with a total weight of 10 kg (1 kg/m2). Its composition is based exclusively on recycled sheep wool (99.5%) and plant fibres (0.5%). The keratinous wool fibres have a thickness ranging from 26 to 40 microns and are compacted through a purely mechanical process.
Sanawool
Thermal mat made entirely from recovered sheep wool, completely free from synthetic fibres, adhesives and polymers. Sanawool is supplied in rolls. Each roll is 10 metres long, 1 metre wide and 10 mm thick, with a total weight of 10 kg (1 kg/m2). Its composition is based exclusively on recycled sheep wool (99.5%) and plant fibres (0.5%). The keratinous wool fibres have a thickness ranging from 26 to 40 microns and are compacted through a purely mechanical process.
Armaglass 160
Anti-crack reinforcement mesh made from alkali-resistant glass fibre yarns, designed for improved stress distribution and to prevent shrinkage cracking caused by thermal fluctuations, surface irregularities, etc. With a weight of 160 g/m² and a 4.5 x 4.5 mm square mesh, Armaglass 160 is the ideal glass fibre mesh for reinforced skim coats.
Armaglass 160
Anti-crack reinforcement mesh made from alkali-resistant glass fibre yarns, designed for improved stress distribution and to prevent shrinkage cracking caused by thermal fluctuations, surface irregularities, etc. With a weight of 160 g/m² and a 4.5 x 4.5 mm square mesh, Armaglass 160 is the ideal glass fibre mesh for reinforced skim coats.
Protech Sil I - Therm
Nanotechnology trowel-applied wall coating for interior and exterior use, anti-condensation, elastomeric, sanitising and thermally insulating, formulated with hollow glass microspheres (3M Glass Bubble – thermal conductivity 0.08 W/mK), heat-reflective and based on siloxane resins in aqueous emulsion with high water vapour permeability, providing a final appearance similar to traditional render. It enables thermal insulation to be achieved, with the clear benefits of recovering the thermal mass of the walls and eliminating thermal bridges and temperature fluctuations in buildings.
Protech Sil I - Therm
Nanotechnology trowel-applied wall coating for interior and exterior use, anti-condensation, elastomeric, sanitising and thermally insulating, formulated with hollow glass microspheres (3M Glass Bubble – thermal conductivity 0.08 W/mK), heat-reflective and based on siloxane resins in aqueous emulsion with high water vapour permeability, providing a final appearance similar to traditional render. It enables thermal insulation to be achieved, with the clear benefits of recovering the thermal mass of the walls and eliminating thermal bridges and temperature fluctuations in buildings.
Sanaxil P - Therm
Mineral potassium silicate paint for interior and exterior use, offering outstanding adhesion to porous substrates through both mineral combination and chemical bonding. It combines anti-condensation and insulating properties (thanks to the presence of hollow glass microspheres 3M Glass Bubble in the formulation – thermal conductivity 0.08 W/mK) with high resistance to mould and microorganisms (thanks to the naturally alkaline pH of potassium silicate) and excellent hiding power (Class 1 according to EN 13300, with a coverage rate of 6–7 m2/l). Due to its mineral nature, Sanaxil P - Therm revolutionises the concept of adhesion to the substrate, penetrating deeply into the wall pores and then reacting with its components to form a unique, indissoluble silicate bond.
Sanaxil P - Therm
Mineral potassium silicate paint for interior and exterior use, offering outstanding adhesion to porous substrates through both mineral combination and chemical bonding. It combines anti-condensation and insulating properties (thanks to the presence of hollow glass microspheres 3M Glass Bubble in the formulation – thermal conductivity 0.08 W/mK) with high resistance to mould and microorganisms (thanks to the naturally alkaline pH of potassium silicate) and excellent hiding power (Class 1 according to EN 13300, with a coverage rate of 6–7 m2/l). Due to its mineral nature, Sanaxil P - Therm revolutionises the concept of adhesion to the substrate, penetrating deeply into the wall pores and then reacting with its components to form a unique, indissoluble silicate bond.
Protech Fix AC - Therm
Water-based anti-condensation wall primer for interior and exterior use, with excellent fixing and bonding properties and good coverage, based on highly penetrating acrylic resins, hollow glass microspheres (3M Glass Bubble – thermal conductivity 0.08 W/mK), pigments, aggregates and covering fillers. Suitable as an anti-condensation fixing primer prior to painting or coating renders with anti-condensation paints or textured coatings (-THERM).
Protech Fix AC - Therm
Water-based anti-condensation wall primer for interior and exterior use, with excellent fixing and bonding properties and good coverage, based on highly penetrating acrylic resins, hollow glass microspheres (3M Glass Bubble – thermal conductivity 0.08 W/mK), pigments, aggregates and covering fillers. Suitable as an anti-condensation fixing primer prior to painting or coating renders with anti-condensation paints or textured coatings (-THERM).