Consilex Muffa Cleaner
Transparent, ready-to-use cleaning agent, for the safe removal of scale blackish incrustations from moulds and biodeteriogenic manifestations, as well as for the revitalising renewal of wooden surfaces.
Consilex Muffa Cleaner
Transparent, ready-to-use cleaning agent, for the safe removal of scale blackish incrustations from moulds and biodeteriogenic manifestations, as well as for the revitalising renewal of wooden surfaces.
Consilex Muffa Remover
Solution based on quaternary ammonium and peculiar active principles for the elimination of biodeteriogenic settlements: moulds, fungi, mosses, algae, lichens, bacteria, etc. from masonry works, in full respect of ecological protocols, with particular reference to biological building interventions and the restoration of vintage buildings and monuments. Over 150,000,000 square metres reclaimed, and 30 years of history, ensure product quality and effectiveness.
Consilex Muffa Remover
Solution based on quaternary ammonium and peculiar active principles for the elimination of biodeteriogenic settlements: moulds, fungi, mosses, algae, lichens, bacteria, etc. from masonry works, in full respect of ecological protocols, with particular reference to biological building interventions and the restoration of vintage buildings and monuments. Over 150,000,000 square metres reclaimed, and 30 years of history, ensure product quality and effectiveness.
Sanareg
Non-film reactive liquid based on an alkylsilane emulsion dissolved in water to be used for the inhibition of saline efflorescence in the dehumidifying restoration of masonry, by spraying or applying with a brush with rigid bristles. Sanareg penetrates into the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered in its path, forming an invisible water-repellent barrier that does not allow water to escape to the surface, leaving the transpiration to water vapor unaltered.
Sanareg
Non-film reactive liquid based on an alkylsilane emulsion dissolved in water to be used for the inhibition of saline efflorescence in the dehumidifying restoration of masonry, by spraying or applying with a brush with rigid bristles. Sanareg penetrates into the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered in its path, forming an invisible water-repellent barrier that does not allow water to escape to the surface, leaving the transpiration to water vapor unaltered.
Sanakoll
Single-component adhesive-skim coat based on hydraulic lime, special flexible polymers, rheological additives, water retainers, microsilicates with pozzolanic activity, spherical aggregates with low specific weight. To be used for leveling skims on various substrates, light gluing and as skim coat/adhesive for our special SANATEX membrane (on thermal bridges, damp and/or damaged masonry).
Sanakoll
Single-component adhesive-skim coat based on hydraulic lime, special flexible polymers, rheological additives, water retainers, microsilicates with pozzolanic activity, spherical aggregates with low specific weight. To be used for leveling skims on various substrates, light gluing and as skim coat/adhesive for our special SANATEX membrane (on thermal bridges, damp and/or damaged masonry).
Sanawool
Thermal insulation mat made entirely from reclaimed sheep’s wool, completely free from synthetic fibers, adhesives, and polymers. Sanawool is supplied in rolls. Each roll is 10 meters long, 1 meter wide, and 10 mm thick, with a total weight of 10 kg (1 kg/m²). Its composition consists exclusively of recycled sheep’s wool (99.5%) and plant fibers (0.5%). The wool keratin fibers have a thickness ranging from 26 to 40 microns and are compacted through a purely mechanical process.
Sanawool
Thermal insulation mat made entirely from reclaimed sheep’s wool, completely free from synthetic fibers, adhesives, and polymers. Sanawool is supplied in rolls. Each roll is 10 meters long, 1 meter wide, and 10 mm thick, with a total weight of 10 kg (1 kg/m²). Its composition consists exclusively of recycled sheep’s wool (99.5%) and plant fibers (0.5%). The wool keratin fibers have a thickness ranging from 26 to 40 microns and are compacted through a purely mechanical process.
Armaglass 160
Anti-cracking reinforcement mesh, based on alkaline-resistant fibreglass fibres for better distribution of tension and to prevent cracks from shrinkage, deriving from temperature variations, planar inhomogeneities, etcetera. With a weight of 160 g/m2 and a 4.5 x 4.5 mm square mesh, Armaglass 160 is the ideal fibreglass mesh for creating reinforced skim coats.
Armaglass 160
Anti-cracking reinforcement mesh, based on alkaline-resistant fibreglass fibres for better distribution of tension and to prevent cracks from shrinkage, deriving from temperature variations, planar inhomogeneities, etcetera. With a weight of 160 g/m2 and a 4.5 x 4.5 mm square mesh, Armaglass 160 is the ideal fibreglass mesh for creating reinforced skim coats.
Protech Sil I - Therm
Spatulated nanotechnological wall coating for interiors and exteriors, anti-condensation, elastomeric, sanitizing, thermal insulator, formulated with hollow glass microspheres (3M Glass Bubble), heat-reflecting based on siloxane resins in aqueous emulsion with high permeability to water vapor, with a similar final appearance to the civil plaster. It allows the creation of thermal insulation with the obvious advantages of recovering the thermal mass from the walls and eliminating bridges and thermal changes in buildings.
Protech Sil I - Therm
Spatulated nanotechnological wall coating for interiors and exteriors, anti-condensation, elastomeric, sanitizing, thermal insulator, formulated with hollow glass microspheres (3M Glass Bubble), heat-reflecting based on siloxane resins in aqueous emulsion with high permeability to water vapor, with a similar final appearance to the civil plaster. It allows the creation of thermal insulation with the obvious advantages of recovering the thermal mass from the walls and eliminating bridges and thermal changes in buildings.
Sanaxil P - Therm
Mineral paint for interiors and exteriors with potassium silicates, with strong adhesion characteristics on porous substrates, both for mineral combinations and for chemical bonds. It combines anti-condensation and insulating characteristics (thanks to the presence of 3M Glass Bubble hollow glass microspheres in the formulation) with strong resistance to mold and microorganisms (thanks to the natural alkaline pH of potassium silicate) and excellent hiding power (class 1 according to EN 13300 for a yield of 6/7 m2 / l). Sanaxil P - Therm due to its mineral nature, revolutionizes the concept of adhesion to the substrate, penetrating deeply into the porosity of the wall and then reacting with its components and forming a unique and indissoluble silicate bond.
Sanaxil P - Therm
Mineral paint for interiors and exteriors with potassium silicates, with strong adhesion characteristics on porous substrates, both for mineral combinations and for chemical bonds. It combines anti-condensation and insulating characteristics (thanks to the presence of 3M Glass Bubble hollow glass microspheres in the formulation) with strong resistance to mold and microorganisms (thanks to the natural alkaline pH of potassium silicate) and excellent hiding power (class 1 according to EN 13300 for a yield of 6/7 m2 / l). Sanaxil P - Therm due to its mineral nature, revolutionizes the concept of adhesion to the substrate, penetrating deeply into the porosity of the wall and then reacting with its components and forming a unique and indissoluble silicate bond.
Protech Fix AC - Therm
Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM).
Protech Fix AC - Therm
Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM).